STERN POLYURETHANE FOAM is an extra-formula assembly and filling foam that is very durable and hardens with moisture in 2-4 hours.
Areas of Use: Fixing doors, window frames and similar joinery; filling the gaps, electricity
installations, insulation of hot and cold water pipes; It is used to close gaps, holes and cracks.
Technical Properties: After 2 to 4 hours of hardening, excess parts can be shaved, sanded and painted. silicone, teflon,
It can stick to all kinds of construction materials except polyethylene and polypropylene. All kinds of weather conditions, sea water, steam and
It is moisture resistant. Can be sanded, painted, difficult to ignite.
How to Use: Shake the I.Tupu vigorously for 30 seconds. 2.Turn the dosage trigger to fill the tube. 3.Application area
Remove dirt, oil and dust and moisten it with water. (Especially the moistening of the ground and the squeezed foam
It is important for acceleration and efficient results.) 4.Use the tube by turning it upside down. 5. In subsequent use, the gun and
the valve should be cleaned of dried foam. o. The froth that gets on unwanted places is cleaned with STERN FOAM CLEANER.
7. Since the volume of the foam will increase, it should be filled in an economical way.
Storage: It should be stored in a dry and cool place at -5°C / 30°C.