Brand - FAB

ABOUT THE PRODUCT:

Nitrocellulose-based, air-drying, glossy finish with a clear finish.

FEATURES:

It dries quickly and does not change the color of the board.

APPLICATION:

Used on all types of coatings and wooden surfaces. Creates a shiny & elastic layer Cellulose can be easily applied on polyurethane. It is important to use FAB CELLULOZIC FILE VARNIC (157) to obtain a smooth surface on the wooden surfaces to be applied after light fussing. After light sumbatalama, FAB CELLULOZIC BRIGHT LACK (155) is dissolved in a 1: 1 ratio with FAB CELLULOZIC TINER (161) until homogeneous and shot with a pistol in the form of 2-3 layers at intervals of 20-30 minutes. Immediately after use, the instruments should be cleaned with FAB CELLULOSIC TINER (161).

INVESTIGATION:

Dilute with FAB CELLULOSIC TINER (161) in a 1: 1 ratio.

DRYING TIME:

(25 ° C / 65% relative humidity): Initial drying: 5-7 minutes. Tactile drying: 20 minutes.

INTELLIGENCE RATE:

<23 c="" p="">

COST:

If applied in a single layer in such a way as to create a dry layer of 30-35 microns, an area of ​​10-12 m² is painted with 1 liter of FAB CELLULOZIC GLASS LACK (155).